FreeMax MAXUS 200W & MAXUS PRO Kit - Product Description
The FreeMax MAXUS 200W Kit is an all new and versatile high amp single or dual battery box mod. Featuring a FM-Chip Maxus 1.0 chipset, paired with the M PRO 2 Tank, and utilizes FreeMax’s all new FM CoilTech 4.0 Technology. Constructed from durable zinc-alloy and visually striking resin panels and equipped with the FM Chip-Maxus 1.0 Chipset, the MAXUS Kit can deliver an instantaneous firing speed of 15ms. Utilizing the ability to operate off a single OR dual battery, the FreeMaX Maxus will have a wattage output of 80W with a single 18650 battery or 200W output with dual 18650 batteries. In addition, the batteries can be installed in any direction thanks to the SmartLoad Technology, making this a great starter kit for beginners. Paired with the FreeMax M PRO 2 Tank, the MAXUS delivers delicious vapor with the new 904L Mesh Coils that heats rapidly and evenly with the FM CoilTech 4.0 Coil Technology. With the ability to access more advanced firing modes, the MAXUS 200W Kit pairs perfectly with nickel, titanium, and stainless steel wires.
Quick Links
FreeMax M PRO 2 Replacement Coils
FreeMax MAXUS 200W Mod Features
- Dimensions – 150mm by 52.5mm by 29mm
- FreeMaX FM Chip-MAXUS 1.0 Chipset
- Powered by (1) or (2) High-Amp 18650 Batteries (Sold Separately)
- SmartLoad Technology – Load Batteries Any Way
- Wattage Output Range – Single Battery: 5-80W
- Wattage Output Range – Dual Battery: 5-200W
- Output Voltage Range: 0.7-8.4V
- Resistance Range: 0.1-3.0ohm
- Temperature Range: 200-600°F
- 15ms Firing Speed
- Power Mode
- VPC Mode
- Bypass Mode
- TC Mode
- TCR Mode
- Titanium, Nickel, Stainless Steel Wire Compatibility
- Zinc-Alloy Chassis Construction
- Intuitive Firing Button
- OLED Display Screen
- Magnetic Battery Door
- Two Adjustment Buttons
- Low Resistance Range
- 10s Timeout Protection
- Open Circuit Protection
- High-Temp Protection
- Low Voltage Protection
- Short-Circuit Protection
- Automatic Coil Test
- Same/New Coil Selection
- Type-C USB Port – Rapid Charging
- Threaded 510 Connection
FreeMax M PRO 2 Sub Ohm Tank Features
- 30mm Diameter
- 5mL Bubble Glass Capacity
- Pyrex Glass Reinforcement
- Superior 304 Stainless Steel Tank Construction
- Sliding Top Fill System – Single Fill Port
- FM CoilTech 4.0 Coil Technology
- 0.15Ω 904L M1 Mesh Coils – Rated for 40-70W
- 0.2Ω 904L M2 Mesh Coils – Rated for 60-90W
- Tea Fiber Cotton Wicking Material
- Threaded Coil Installation
- Dual Slotted Bottom Airflow Control Ring
- 810 Widebore Drip Tip
- 510 Threaded Connection
What’s Included
- 1-Qty MAXUS 200W Box Mod
- 1-Qty M PRO 2 Sub Ohm Tank
- 1-Qty 0.15Ω 904L M1 Mesh Coil
- 1-Qty 0.2Ω 904L M2 Mesh Coil
- 1-Qty 5mL Replacement Glass
- 1-Qty Extra O-Ring
- 1-Qty USB Type-C Charging Cable
- 1-Qty User Manual
- 1-Qty Warranty Card
- Authenticity Code on Retail Box
General Tips
- Only use Sony VTC Batteries, Samsung or LG Batteries with your Box Mod. We will not be held responsible for improper use of the mod or any damages that may occur from using this box mod.
- Always use the same brand and model batteries in the mod. For Example use (2) Sony VTC5 18650 batteries or (2) Efest Purple 35A 18650 batteries. DO NOT mix the batteries in your mod. For Example DO NOT use (1) Sony VTC5 18650 Battery and (1) Efest Purple 35 18650 Battery, damage may occur.
- The batteries used in your mod MUST have the same level of charge, be the same brand and should be batteries that were purchased together WITHOUT prior and charged together. Failing to follow these steps could result in serious damage to your mod and could cause serious personal injury.
- Always Use Protected Batteries from Reputable Brands Such as Sony, LG or Samsung. Failure to Use These Batteries Can Result in Explosion and/ or Severe Incorrect Fitment.
